Optimization of Spark Ignition Engine Performance using a New ‎Double Intake Manifold: Experimental and Numerical Analysis

[1] Heywood, J.B., Internal combustion engine fundamentals, 2^th ed., McGraw-Hill Inc., 2018.

[2] Keoleian, G.A., Kar, K., Elucidating complex design and management tradeoffs through life cycle design: air intake manifold demonstration project, Journal of Cleaner Production, 11, 2003, 61–77.

[3] Siqueira, C.D.L.R., Kessler, M.P., De Araújo, L.A.R., Rodrigues, E.C., Three-dimensional Transient Simulation of an Intake Manifold using CFD Techniques, SAE Technical Paper, 2006, 0148-7191.

[4] Ceviz, M., Intake plenum volume and its influence on the engine performance, cyclic variability and emissions, Energy Conversion and Management, 48 (3), 2007, 961-966.

[5] Ceviz, M., Akın, M., Design of a new SI engine intake manifold with variable length plenum, Energy Conversion and Management, 51(11), 2010, 2239-2244.

[6] Jemni, M.A., Kantchev, G., Abid, M.S., Influence of intake manifold design on in-cylinder flow and engine performances in a bus diesel engine converted to LPG gas fuelled, using CFD analyses and experimental investigations, Energy 36, 2011, 2701-2715.

[7] Butt, Q.R., Bhatti, A.I., Mufti, M.R., Rizvi, M.A., Awan, I., Modeling and online parameter estimation of intake manifold in gasoline engines using sliding mode observer, Simulation Modelling Practice and Theory, 32, 2013, 138–154.

[8] Vichi, G., Romani, L., Ferrari, L., Ferrara, G., Development of an engine variable geometry intake system for a Formula SAE application, Energy Procedia, 81, 2015, 930-941.

[9] Manmadhachary, A., Kumar, M.S., Kumar, Y.R., Design&manufacturing of spiral intake manifold to improve Volument efficiency of injection diesel engine by AM process, Materials Today: Proceedings, 4, 2017, 1084–1090.

[10] Giannakopoulos, G.K., Frouzakis, C.E., Boulouchos, K., Fischer, P.F., Tomboulides, A.G., Direct numerical simulation of the flow in the intake pipe of an internal combustion engine, International Journal of Heat and Fluid Flow, 68, 2017, 257–268.

[11] Zhao, J., Xi, Q., Wang, S. Wang, S., Improving the partial-load fuel economy of 4-cylinder SI engines by combining variable valve timing and cylinder-deactivation through double intake manifolds, Applied Thermal Engineering, 141, 2018, 245–256.

[12] Hall, C.M., Shaver, G.M., Chauvin, J., Petit, N., Control-oriented modelling of combustion phasing for a fuel-flexible spark-ignited engine with variable valve timing, International Journal of Engine Research, 13, 2012, 448-463.

[13] Silva, E.A.A., Ochoa, A.A.V., Henríquez, J.R., Analysis and runners length optimization of the intake manifold of a 4-cylinder spark ignition engine, Energy Conversion and Management, 188, 2019, 310–320.

[14] Sadeq, A.M., Bassiony, M.A., Elbashir, A.M., Ahmed, S.F., Khraisheh, M., Combustion and emissions of a diesel engine utilizing novel intake manifold designs and running on alternative fuels, Fuel, 255, 2019, 115769.

[15] Souza, G.R.D, Pellegrini, C.D.C, Ferreira, S.L., Pau, F.S, Armas, O., Study of intake manifolds of an internal combustion engine: A new geometry based on experimental results and numerical simulations, Thermal Science and Engineering Progress, 9, 2019, 248–258.

[16] Liu, G., Ruan, C., Li, Z., Huang, G., Zhou, Q., Qian, Y., Lu, X., Investigation of engine performance for alcohol/kerosene blends as in spark-ignition aviation piston engine, Applied Energy, 268, 2020, 114959.

[17] Menzel, G., Och, S.H., Mariani, V.C., Moura, L.M., Domingues, E., Multi-objective optimization of the volumetric and thermal efficiencies applied to a multi-cylinder internal combustion engine, Energy Conversion and Management, 216, 2020, 112930.

[18] Mariani, V.C., Ochc, S.H., Coelho, L.D.S, Domingues, E., Pressure prediction of a spark ignition single cylinder engine using optimized extreme learning machine models, Applied Energy, 249, 2019, 204-221.

[19] Zhao, H., Zhao, N., Zhang, T., Wu, S., Ma, G., Yan, C., Ju, Y., Studies of multi-channel spark ignition of lean n-pentane/air mixtures in a spherical chamber, Combustion and Flame, 212, 2020, 337-344.

[20] Och, S.H., Moura, L.M., Mariani, V.C., Coelho, L.D.S., Velásquez, J.A., Domingues, E., Volumetric efficiency optimization of a single-cylinder D.I. diesel engine using differential evolution algorithm, Applied Thermal Engineering, 108, 2016, 660-669.

[21] Shi, C., Ji, C., Wang, S., Yang, J., Ma, Z., Xu, P., Assessment of spark-energy allocation and ignition environment on lean combustion in a twin-plug Wankel engine, Energy Conversion and Management, 209, 2020, 112597.

[22] Gocmen, K., Soyhan, H.S., An intake manifold geometry for enhancement of pressure drop in a diesel engine, Fuel, 261, 2020, 116193.

[23] Chalet, D., Mahe, A., Migaud, J., Hetet, J.F., A frequency modelling of the pressure waves in the inlet manifold of internal combustion engine, Applied Energy, 88, 2011, 2988–2994.

[24] Hasankola, S.S.M., Shafaghat, R., Jahanian, O., Nikzadfar, K., An experimental investigation of the injection timing effect on the combustion phasing and emissions in reactivity-controlled compression ignition (RCCI) engine, Journal of Thermal Analysis and Calorimetry, 139, 2020, 2509–2516.

[25] Boretti, A., Water injection in directly injected turbocharged spark ignition engines, Applied Thermal Engineering, 52(1), 2013, 62-68.

[26] Bozza, F., De Bellis, V., Teodosio, L., Potentials of cooled EGR and water injection for knock resistance and fuel consumption improvements of gasoline engines, Applied Energy, 169, 2016, 112-125.

[27] Vos, K.R., Shaver, G.M., Lu, X., Allen, C.M., Jr, J.M., Farrell, L., improving diesel engine efficiency at high speeds and loads through improved breathing via delayed intake valve closure timing, International Journal of Engine Research, 20, 2019, 194-202.

[28] Gong, C., Yu, J., Wang, K., Liu, J., Huang, W., Si, X., Wei, F., Liu, F., Han, Y., Numerical study of plasma produced ozone assisted combustion in a direct injection spark ignition methanol engine, Energy, 153, 2018, 1028-1037.

[29] Trindade, W.R.D.S, Santos, R.G.D., 1D modeling of SI engine using n-butanol as fuel: Adjust of fuel properties and comparison between measurements and simulation, Energy Conversion and Management, 157, 2018, 224-238.

[30] Ghazal, O.H., Combustion analysis of hydrogen-diesel dual fuel engine with water injection technique, Case Studies in Thermal Engineering, 13, 2019, 100380.

[31] Tuchler, S., Dimitriou, P., On the capabilities and limitations of predictive, multi-zone combustion models for hydrogen diesel dual fuel operation, International Journal of Hydrogen Energy, 44, 2019, 18517–18531.

بی مایند...